Professional Restoration Series (PRS) Water Damage PreClean

Cleaning Solution for Restoration Professionals - PRS Water Damage PreClean is a non-toxic, biologically based initial treatment for water damage, especially black water. It digests odors and soils, including those from fecal matter and urine, reducing them to water and carbon dioxide. PRS Water Damage PreClean utilizes spore strains and advanced cleaning technology specifically engineered for water damage. It is also designed for areas of heavy pet urine and soils from trauma.

PRS Water Damage PreClean can help achieve timely and productive results for restoration professionals in water damage. Conventional odor control is not required. PRS Water Damage PreClean eliminates odors within the location, liquefies solids in black water, starts the organic digestion process in all areas of sustained moisture, and minimizes odors within clean up equipment (i.e. wet vacs etc.). In the event of a “Major Cat” PRS Water Damage PreClean can be used as a ‘stop-gap’ to control odors and soil load until a cleanup crew is available. Do not introduce any non-PRS chemistry while PRS Water Damage products are at work.

• Shake well before use
• Do not use below 50°F
• Standing Black Water/Heavy Load: Apply 2 gallons PRS PreClean per 400 ft² per one-foot depth. (1-gallon/1500 gallons of black water).
• Standing Black Water/Moderate Load: Apply 1 gallon PRS PreClean per 400 ft² per one-foot depth (or 1 gallon/3000 gallons of black water).
• Dried or Moist Load: Dilute 1 gallon PRS PreClean with at least 1 gallon of water. For example, fill a 2 gallon pump up sprayer with 1 gallon PRS PreClean and 1 gallon of water.
• Apply until contained area is visibly wet. Reapply as required to maintain visible wetness. Depending on the surface and drying conditions a 2 gallon pump up sprayer can cover up to 1000 ft². Use any standing water or existing moisture as part or all of your dilution calculations. You may pour undiluted product directly into standing water if mixed.
• Perform physical cleanup per IICRC S-500 guidelines. Extract residual, and remove contents, carpets, etc., depending on class of contamination. Clean/pressure clean all surfaces and then apply PRS Water Damage PostClean based on instructions. Start your drying process as soon as possible.